Top 10 Common Rolling Shutter Problems and Solutions

Top 10 Common Rolling Shutter Problems and Solutions

Rolling shutters, commonly used for garages, shops, and industrial facilities, often face issues due to wear and tear. Here are the top 10 most common problems and their solutions:

1. Misaligned Tracks

Issue: The tracks of rolling shutters can become misaligned due to frequent use or accidental impacts.
Solution: Tighten any loose screws and clean the tracks to remove debris. If the issue is more severe, disconnect the door from the opener, realign the guides, and ensure the gap dimensions are correct.

2. Remote Control Failure

Issue: The remote control stops responding and can’t operate the rolling shutter.
Solution: Try replacing the batteries or resyncing the remote. If the wall switch is also not functioning, the issue may require more complex electrical repairs.

3. Stuck Door

Issue: The rolling shutter gets stuck and won’t open or close properly.
Solution: Check the power supply, ensure the remote is functioning, lubricate the moving parts, and inspect the sensors and limit settings. If necessary, replace worn-out components.

4. Door Keeps Reversing

Issue: The rolling shutter reverses and opens again after attempting to close.
Solution: Inspect the threshold area for obstructions or debris and make sure the threshold seal is attached securely to allow proper closure.

5. Door Opens Too Quickly

Issue: The rolling shutter rises too quickly, potentially leading to damage.
Solution: Adjust the spring tension to slow down the door’s movement and ensure smoother operation.

6. Broken Springs

Issue: The rolling shutter springs break, preventing the door from functioning correctly.
Solution: Replace the broken springs with new ones and ensure that they are suitable for the door’s weight.

7. Incomplete Closure

Issue: The rolling shutter doesn’t close fully, creating a security risk.
Solution: Check for any obstructions, adjust the limit switch, and make sure the door is properly aligned for a complete close.

8. Lock Malfunction

Issue: The rolling shutter lock isn’t working properly, compromising security.
Solution: Inspect the lock for wear and tear. Replace the lock or repair the lock mechanism if necessary.

9. Motor Failure

Issue: The motor stops functioning, causing the rolling shutter to malfunction.
Solution: Check the power supply and inspect the motor for overheating or damage. If the motor is faulty, consider replacing it with a new one.

10. Deformed Panels or Slats

Issue: The rolling shutter panels or slats are bent or deformed, affecting its operation.
Solution: Minor deformities can be adjusted, but if the damage is severe, replacing the deformed parts is recommended.

Regular maintenance and timely repairs can prevent these common issues and extend the lifespan of your rolling shutter. For serious problems, it’s best to seek professional repair services.

if you need repair ,contact us 929-500-0059